30December 2021
so let's take a look at the
m18 Force Logic hole punch by Milwaukee in order to make holes in trunking in order to get my 25 mm hole in this trunking
in our first we'll do a pilot hole of 12 mm next i'll bring it in my punch
assembly lock it into position bring the appropriate cut which is 25 mil locate
the two together finger tight underneath position the punching process by pressing the trigger
you'll see it pull up ansstart the cutting process and you can see there my 25mm hole with a smooth
inside and outside cut reverse the process back off like so and remove the
assembly and then remove the metalwork that's been cut out of the trunk
in like so we welcome your comments below
