(metal whirring) (whooshing) – Thank you for joining me today. This is the, my tool case I use for everyday. This is like, almost, like the case that goes
to every single job. Now, everybody has their own preferences. Actually, I almost prefer
a slightly bigger case. I tend to specialize, in our company, I tend to specialize in the lock out or locked in their house or out of a cabinet, bathroom, whatever. So I like to do lock outs. With all these big box hardware
stores selling the cheapest, crappiest locks to the public that were getting malfunctions like crazy. People are getting locked out, locked in. They're failing like crazy. Plus, we have so much new construction, they're putting in crap locks. They're putting in $10
dead bolts that don't last. We're getting malfunctions like crazy. So my main thing that I do is lock outs, you know, quick rekeys.
I spend a lot of my time in the office, but I love going out and doing lock out. So I'll just grab my kit and we'll go over all my different
kits in the other videos. But I have an installation
for installing lock kit. I have a kit for doing,
like, large rekeys. This is just short and
sweet and does lock outs. Sometimes, I put this on a wheeled cart and on the wheeled cart, we'll have extra locks for
what I think is for the job if I have to replace, but again, this is mine. Everybody has their own preferences. Some people, we'll just see. This is just one of many. I tend to have a box per job. If I have broken keys and locks,
I have another little bag. We'll go over that in another video. So this is just lock outs. Your locked out of your house, locked out of something, office, quick, easy rekeys, remove and replace a faulty lock. So this is my kit. I always have my picks and
we'll go in details everything. I usually carry two cases of picks. I like my picks.
This is my favorite set. We'll go over that. We'll find the other ones in a bit. I like WD-40. Now, I use (metal rattling) Tri-Flow is my lubricant that I like and there's advantage
and disadvantages to it, dry or whatever. I like Tri-Flow.
(can rattling) Use it a lot. When I pick locks, I use WD-40. If I can't pick a lock,
and I spray it with WD-40, it always opens for me. I have, my friends, they can't pick a lock and
then they use Tri-Flow. It's personal preference. I think it's a mental problem with me. I think I've just been using
Tri-Flow my whole life. This is what I'm used to. And of course, I have Milwaukee. We're not sponsored by Milwaukee. I just like to standardize my batteries. So I have my little, cordless drill. This is not a brushless. This is a really, this thing, I think this thing's like 12 years old.
It's over 10 years old. And I like the batteries and I got my LED light
(switch clicking) and it takes the same battery, so, and I love these because
I have the little, I can see what my
battery power is on that. So cordless, this is only a cordless screwdriver. It's what I like. (screwdriver thumping) I always take a drill. It's not a hammer drill. I have a hammer drill in the truck if I need something more heavy duty. This is the FUEL system. This one's getting pretty old now. The next videos, I've, replacing the three amp batteries.
(battery clicking) I got one smaller, more power. The half size ones, I just don't find have the guts to drill, if I have to drill out a lock, a sheer line or its malfunctioned, I gotta drill out the screws. So you'll see the new
battery in another video, right after this, coming
up, that I'm replacing. It'll be lighter and way more power.
So it's not a hammer drill,
just for basic stuff. Again, I like the batteries. I standardized the batteries. (drill thumping)
(plastic crinkling) This is just a milk jug or a Lloyd. I have videos on this. I don't know how, this gets
me into a lot of locks. There's so much gap in the door. I just use this. And I slip the lock. Lots of videos on me using
a Lloyd, is the proper name, to slip the lock, way
better than a credit card, there's other materials, and I've got some new
videos coming up soon with me making different
versions, more heavy duty. But again, this one, it's just a milk jug and it gets me in so many locks. (plastic crinkling) Oh, these are my next, a lot of times, if I can't pick it or it won't
be picked or I can slip it.
So I have, this is just a painter's tool. This will open up latches. It's already made. It's ready to go. It's inexpensive. It does the trick. So I think they use this for cleaning the rollers, opening the lids. Great tool, use it all the time.
(metal thudding) And then I have just some flat ones, different things and just
for slipping latches. And that's my three main ones I use. It's all good. (metal thumping) Let's get into, I like a
large pair of vice grips.
I have my Hex Key sets. This is a new one. Video coming up on this. So I have the metric
and I have the standard. Always got to have those. (metal thumping) We get into my other pick set. I like picks. So I have, ones that I have
here are for my pocket. This is always in the kit. I'll go into these more in depth. You know, if we are replacing the lock, and I gotta mortise it out, if there's a drive in,
I gotta mortise it out, I just have these in there. They should go in my installation bag.
(metal clanging) My basic drills. It may say Milwaukee, but I have a little bit
of everything in here and we'll go over the drill
preferences in another video, And I go through a lot of eight, eighth-inch and quarter-inch drills. I like the jobber bits,
(plastic snapping) the blue steel, some people call them jobber bits. They're very forgiving. They don't snap, but I have my coal bolts and whatever, it's for drilling stainless
or really high security locks. I have lots and lots of drill bits. And I've had videos on these. They're Megapros. And this one just has all your
standard Roberts, Phillips, has some torques. These are great.
(plastic snapping) (metal thumping) This one's for the Hex.
(plastic snapping) You know, just all in one spot.
(plastic snapping) And this one, if you
don't have it, get it. It's got all these security bits. I have videos on each one of these. This is just showing you my everyday kit.
This is kind of interesting. This is actually for opening up a car, for getting a little bit of leverage so I can get my airbags in there. So I use this sometimes, I gotta just spread the door a little bit. And I don't wanna do damage to it. This just holds it, you know, spreads it nicely, just to
get a little bit more leverage into the latch or sometimes
the faulty deadbolts, the bolt is not going back
for mostly malfunctions. That's just another little tool to help. Always get the vice grips (metal snapping) or the channel grips, just handy. We do a lot of wellness checks for police, different agencies, you know, with the animal control bylaw officers with the various police departments. So I have a bigger kit that gets us ready for hitting almost anything, when we have to open up something, when it's involving a
warrant for the police.
That's another kit. This is just my small vice grips. I always like my Wera screwdrivers. This is a flat head and I've ground it down a little bit so it just fits perfectly. Sometimes, you know, you get the customers
where the plug has come out of the lock. I can just put this in there, turn it, open up the door. It's got the, (metal knocking) you know, strike all the way through. Just more little Wera's flat heads, you know, if we're doing Adams Rite, I've taken out the mortise cylinder, the little flat head screw in there, sometimes they're Allen keys. A lot of times they're
just little flat head.
So I just like to have
various sizes of that. I got two of these. This should go in the other kit. Again, that's the Megapro. I don't know why have this, had this since I was an apprentice. My granddad had it. It just always in my tool case. It's, I don't really use it that much. It's just (metal thumping) good luck. Another one of my flat heads. Oh, you can't go wrong. Gotta have a good, aw, this Mac Tool. I like this. If I have to depress the retainer, it's just heavy duty, lasts forever. Another little, tiny pry bar. Again, two pry bars.
Sometimes you gotta just open up that, spread that door just a little bit more, gotta be a little bit
tougher than using this one that won't make any marks. Sometimes a break in,
everything's busted up, the door's all beat all to heck. These two little pry bars, yes, there's bigger pry bars. That's in another kit and I'll
show you in another video. This is just my everyday carry and we got little vice grips. It's all ready to impression. And sometimes when impression locks, or just grab something small. What do they call that? Castle nut. It's got both sides. Boy, if you don't have this, and you're pulling apart some
of the grade one lever locks, jeez, you're toast without this. So you gotta have that
castle nut in there.
I like to have one chisel, one inch, just for if I have to mortise it out, the latch a little bit. Always gotta have my adjustable and I have a larger one in my
installation kit for using, you'll see. If you watch the video, you'll
see why we have a larger one and what we're doing for
metal doors with that. Couple more, again, like I said, I do a lot, this is my lock out kit. I'm doing lock out. So I've got various, little pry bars. You know, sometimes you can
force the latch, slip the latch. I got a little Snap-on
set, little plasticky one. This thing works out quite well. What else do we have? A couple more screwdrivers.
(metal scraping) like my screwdrivers
(metal scraping) and an awl, nice little pointy. If my large one is too big,
(metal clattering) I got the little one. I can just push the retainer or somebody's broken key, another awl, I really don't
need that one in there. Oh, circlips. Still get a lot of locks, mostly the older-style stuff. But if you don't have this, let's take the Wei, the
old-style Weiser Key-in-Knobs. You got that little
retainer clip on the back. I always get the Snap-on ones cause they last for, you
know, the replacement, if something breaks, they last forever. Always have these in there. Hardly use 'em but when I do need it, I need it. A needle nose, you know those pliers. Have you ever get locked out and the malfunction is actually
in the bolt of the lock or the latch? So I drilled off the deadbolt. I pulled and pried all the bits and pieces to get that bolt back. And sometimes the thing is
just falling apart so bad.
You just got to strip
it down piece by piece. So this gets right in
there and pulls it out. One inch spade bit. And it's amazing how many doors, the doorframe they have not, they drill a half-inch
hole for a deadbolt. Just gotta open up that little bit more. So I always have one of these in there. This used to come with like
every Schlage Lock, super handy. Jeez, these are like gold now, if you can get your hands on 'em. Always have a couple of these around. What else do we have in the kit? More little screwdrivers, more little awls, you know, hook awl for poking. Some of these are Mac, some of these are Snap-on, Wera, or sometimes they're
just something cheap that I've just modified. Of course, lipstick, see the video, but it basically is for marking the bolt to see where the door is scratching.
Gotta have lipstick and red, any color you want, really. Now, I always carry a few popular keys. I have about five keys ready. Precuts, Schlage, Kwikset, Weiser, whatever your popular locks are. I always have them in my, a few in my kit. If I know what the customer has, I'll precut the keys. I hate cutting keys on the job site. So I'll have sets of
five or 10 ready to go. This is my mini LAB re-keying kit. I love this.
I, you know, I'm just going
in to rekey one or two locks or whatever. So I just throw my pins in here. I got the 005. I have the 003s. I prefer the 005. I know most people prefer the 003. I got the Wedge kit in my service truck. This crams in here. It gets it going. So that's for my rekeying. (metal rolling) Here's my kit. This is my basic rekeying, or rekey kit and also a few other things. So I always throw a couple
of my favorite picks. One of my favorite picks at the
moment is the hook and ball. This is a Rytan. I got some Petersons. I got some that I've made up. So I have that little kit in there. I throw a couple of shims in there, (metal clattering) dental pick. This is an Allen key for Lorilocks. Boy, I hate those things. If I don't have this, then I'm screwed. I have my end cap removal tool. (metal clattering) I have my pickle, your Kwikset cylinder removal tool. Some people call it the pickle. I got a little follower in there. A couple blanks for shimming.
(metal clattering) If I have to put on the end of my drill, I put out the little grinders
to drill out the strike, especially at the change of seasons. Basically, I got different versions for just really grinding up the strike when they're sticking. (metal clattering) Oh, of course, my tweezers, more little followers, a couple of things for
pulling out broken keys. Again, this is just the small,
quick kit just to pull out, (metal clattering) if I get a broken key. (metal clattering) That just, this use, and
these are Peterson's.
This is fantastic. I think they're only $5 each. Just spiral it in there and pull it out. That's just amazing for
pulling out broken keys. Let me show you my picks. (metal clattering) I got, this is my everyday. This is like,
(zipping) these are my two sets I always carry. So here I have my favorites in here. I got my plug spinner, different tension wrenches, again, different picks.
This, you know, this set will do almost everything. And again, the plug
spinner, A1 Plug Spinner. I have Rytans. I got a little bit of everything. They're all good. There's another little kit
with just a, sort of, a backup of my favorites. You know, here's my Peterson,
Rytans, A1 Plug Spinner. My Rytan Plug Spinner's in another kit. Right now, these are my favorites. My HPC followers set. So this will do, so basically, it's sort of four followers, here's the most popular and
they got the ends are all done. So we got 1, 2, 3, 4. It's a great little set. Of course, I have the ones that I make, but then this is just a
ready-made kit, ready to go. It's always there. (metal clattering) We make these up ourselves. I just buy six-foot, one-inch brass, cut 'em and then we shape 'em. (metal rattling) You know, when I got some time, shape 'em for what we
need done for various, but they all start off like this, just for the simple locks, quick, easy, fast. And this is when we get a
little bit more complex designs, some locks that are giving us trouble.
This is my kit. This is my everyday, it's the first thing I
grab to do a lock out. Yes, there's more stuff to have. And I have bigger kits. This doesn't do everything. I'm always interested in
everybody's new ideas. I love seeing new tools. I like seeing how different
people use different, how they set up their bags. And this is just, and this is a PACKOUT bag. If I go to a larger job, the PACKOUTs are kinda nice. And it also, redesigning
a new service truck. So the PACKOUTs just lock in
there really, really nice. So, and this fits on top of
the little wheeled thing. If I get a bigger job,
I'd take the wheels. If I got stairs or whatever, I can put this on top of a rack. So I think I need one slightly bigger.
This is a lot of tools. It's what I like. This will, I rarely have to
go back to my service truck. And again, it depends what
I'm doing for the job. I have other videos, shows
my broken key extractor set. I have an installation set. I have a big set we're putting together for more brute force and ignorance, wellness checks, assisting
the police on opening doors. A lot of times they don't
want to bust down the doors. It's, we can come in nicer. Even if we have to pick it, if we're locked out, we
can pick it real easy. Or if we even have to drill
the lock, we're set up for it. I'll have to tell the story another day, we just had a job from hell
and everything went wrong. And that's what made me re,
sort of decide how I have to do my major lock out kit,
where we have to go in, of course, nobody's inside, so we're not worried
about people being inside, but we still have to get
through in a timely manner, a little bit quicker than normal.
So it's gonna involve probably
saws-saws, cordless cutters, grinders, larger, more heavy duty drills. And standby for my next video on my, the new battery for this,
should make it lighter. It should make it a little bit
better, more power, lighter. And I've tried the half
size, the 1.5s on these. They can do the job. But really, if we're drilling
a lock or installing the lock, you need a little bit more umph. So I think I found a happy medium between the half size of this, the 1.5s. This is the 3.0s, and I have a new 3.0 and a really interesting video on that.
Give your suggestions. What are the tools you carry on your everyday carry going in? I hope this is a help
for beginner locksmiths. You know, this is 25 plus years of me doing jobs. And this is my kit. I'm always interested in how you do it. Have some suggestions. There's always more we can carry. And I have other kits for
other jobs, bigger jobs, installation jobs, or
more complex lock outs. This is just a very, very simple kit. And it probably does, for me, my simple lock outs and my simple rekeys, this probably does 90% of what I need. Okay, hope you enjoyed the video. Please like it. Please subscribe. Have a good day. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online
locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my non-destructive methods of entry.